Escalade AWD V8-6.2L (2009)
1. Install the gasket.
2. Install the booster assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the 4 booster to bulkhead nuts and tighten to 33 Nm(24 lb ft).
4. Install the stop lamp switch. Refer to Stop Lamp Switch Replacement (Non-Adjustable Pedal) (See: Lighting and Horns/Brake Light
Switch/Service and Repair/Stop Lamp Switch Replacement (Non-Adjustable Pedal))Stop Lamp Switch Replacement (Adjustable Pedal) (See:
Lighting and Horns/Brake Light Switch/Service and Repair/Stop Lamp Switch Replacement (Adjustable Pedal)).
5. Install the master cylinder to the brake booster and tighten to 33 Nm(24 lb ft).
6. Connect the return hose, the steering gear, and the inlet hoses.
7. Bleed the hydraulic booster system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power Steering/Power
Steering Bleeding/Service and Repair).
8. Release the park brake and unblock the wheels.
