Escalade AWD V8-6.2L (2009)
Note: Insert the 3 lower tabs into the radiator support flange. Keeping the shroud parallel to the radiator will ensure the correct installation of the
lower tabs.
1. Install the cooling fan and shroud.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the cooling fan shroud bolts.
Tighten the bolts to 9 Nm(80 lb in).
3. If equipped, install the cooler lines to the clip and close the clip.