Escalade AWD V8-6.2L (2009)
1. Install the brake pedal position sensor (3) to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the brake pedal position sensor bolts (2) and tighten to 9 Nm (80 lb in).
3. Connect the brake pedal position sensor electrical connector (1).
4. Install the fuse block cover.
5. Install the driver knee bolster. Refer to Knee Bolster Replacement (Except Cadillac) (See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair)Knee Bolster Replacement (Cadillac) (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair).
