Escalade AWD V8-6.2L (2009)
3. Remove the EVAP lines from the fuel tank clips (2, and 6).
4. Open the fuel tank clips (1, 3, 4, and 5) and remove the EVAP lines from the clips.
5. Disconnect the EVAP line quick connect fittings at the fuel tank module and vent valves. Refer to Plastic Collar Quick Connect Fitting Service (
See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
6. Remove the EVAP lines from the fuel tank.
Installation Procedure
