Escalade AWD V8-6.2L (2009)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement (1500 Series)
Fuel Level Sensor Replacement (1500 Series)
Removal Procedure
1. Remove the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (2500 LWB - 98.4L (26 gal) Tank Front) (See: Powertrain
Management/Fuel Delivery and Air Induction/Fuel Pump/Service and Repair)Fuel Tank Fuel Pump Module Replacement (1500 SWB - 98.4L (26
gal) Tank + E85) (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and Repair)Fuel Tank Fuel Pump Module
Replacement (1500 Series) (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and Repair)Fuel Tank Fuel Pump
Module Replacement (1500 LWB - 117.3L (31 gal) Tank + E85) (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Pump/Service and Repair)Fuel Tank Fuel Pump Module Replacement (2500 LWB - 43.5L (11.5 gal) Tank Rear) (See: Powertrain
Management/Fuel Delivery and Air Induction/Fuel Pump/Service and Repair).
2. Using a small pick like tool, push in the retainer (1) in order to disengage the electrical connector.
3. Remove the fuel level sensor electrical connector from the module cover.
4. Push the level sensor locking tangs (2) in towards the inside of the module bucket.
5. Slide the fuel level sensor up.
