Escalade AWD V8-6.2L (2009)
Fuel Tank Pressure Sensor: Service and Repair
Fuel Tank Pressure Sensor Replacement (2500 Series)
Fuel Tank Pressure Sensor Replacement (2500 Series)
Removal Procedure
Important: Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to
avoid possible fuel and/or EVAP system contamination.
1. Remove the intermediate fuel and evaporative emission (EVAP) lines. Refer to Fuel Hose/Pipes Assembly Replacement (1500 LWB - 117.3L (31
gal) Tank ) (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Supply Line/Service and Repair)Fuel Hose/Pipes Assembly
Replacement (1500 SWB - 98.4L (26 gal) Tank) (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Supply Line/Service and
Repair)Fuel Hose/Pipes Assembly Replacement (1500 LWB - 117.3L (31 gal) Tank + E85) (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Supply Line/Service and Repair)Fuel Hose/Pipes Assembly Replacement (1500 SWB - 98.4L (26 gal) Tank + E85) (See:
Powertrain Management/Fuel Delivery and Air Induction/Fuel Supply Line/Service and Repair).
2. Gently pry straight up, in order to remove the fuel pressure sensor.
Installation Procedure