Escalade AWD V8-6.2L (2009)
7. Pressing the J 38125-12A tool in the release cavity of the terminal you are removing, gently pull the wire out of the back of the connector. Always
remember never use force when pulling a terminal out of a connector. See the release tool cross reference in the Reference Guide of the J-38125
to ensure that the correct release tool is used.
Terminal Repair Procedure
Use the appropriate terminal and crimper in the J-38125 in order to replace the terminal.
Tyco/AMP Connectors (Door Module)
Tyco/AMP Connectors (Door Module)
Special Tools
J-38125 Terminal Repair Kit
Removal Procedure
Side view of connector.
View of top of connector.
1. Locate the assist lever and lock on the top of the connector.
