Escalade AWD V8-6.2L (2009)
5. Install the starter solenoid cable terminal (2) to the fuse stud.
6. Install the starter solenoid cable nut (1) to the fuse stud.
Tighten the nut to 15 Nm(11 lb ft).
7. Install the fuse cover.
8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery Cable/Negative/Service
and Repair).
200 Amp Mega Fuse and Auxiliary Electrical Center 12VDC Junction Block Replacement
200 Amp Mega Fuse and Auxiliary Electrical Center 12VDC Junction Block Replacement
