Escalade AWD V8-6.2L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the oil pan bolts.
Tighten the bolts alternately and evenly to 11 Nm(97 lb in).
6. Install the catalytic converter. Refer to Catalytic Converter Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Catalytic
Converter/Service and Repair/Catalytic Converter Replacement).
7. If previously removed, install the range selector cable bracket and bolts.
Tighten the bolts to 25 Nm(18 lb ft).
8. Apply a small amount of sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent to the threads of the oil pan drain plug, if equipped.
9. Lower the vehicle.
10. Fill the transmission to the proper level with DEXRON(R) VI transmission fluid. Refer to Transmission Fluid Check (See: Testing and
Inspection/Component Tests and General Diagnostics) and Fluid Capacity Specifications ().
11. Check the COLD fluid level reading for initial fill only.
12. Inspect the oil pan gasket for leaks.