Escalade AWD V8-6.2L (2009)
9. Remove the cable grommet from the floor panel.
10. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
11. Remove the clips on the cable from the floor panel reinforcement.
12. Ensure the transmission manual shaft is positioned in mechanical park.
13. Remove the cable clip on the transfer case, if equipped.
14. Remove the range selector cable (2) from the transmission range selector lever ball stud.
15. Remove the retainer (1) that secures the cable to the bracket.
16. Depress the tangs and remove the cable from the bracket.
17. Remove the transmission range selector cable from the vehicle.
Installation Procedure
1. Install the transmission range selector cable to the vehicle.
