Escalade AWD V8-6.2L (2009)
1. Install the shift lever (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the shift lever bolt (2) and tighten to 20 Nm(15 lb ft).
3. Connect all electrical connectors.
4. Position the shift lever seal.
5. Install the steering column shroud. Refer to Steering Column Shroud Replacement (Without Electronic Tilt Steering) (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Steering Column Shroud Replacement (Without Electronic Tilt Steering))Steering
Column Shroud Replacement (With Electronic Tilt Steering) (See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Steering Column Shroud Replacement (With Electronic Tilt Steering)).
