Escalade ESV AWD V8-6.2L (2007)
16. If equipped with RPO LY6 (6.0L) engine, perform the following:
1. Remove the oil cooler hose bracket bolt. (1)
2. Remove the oil cooler hose adapter bolts. (2)
3. Remove the oil cooler hose assembly. Discard the gasket.
4. Inspect the fittings, connectors, and cooler hoses for damage or distortion.
Installation Procedure
Notice: Refer to Fastener Notice.
1. If equipped with RPO LY6 (6.0L) engine, perform the following:
1. Install the oil cooler hose assembly and a NEW gasket.
2. Install the oil cooler hose adapter bolts (2).
Tighten the bolts to 12 N.m (106 lb in).
3. Install the oil cooler hose bracket bolt.
