cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Instruments - Ambient Temperature Display Inaccurate|Page 17465 > < A/C - Defaults To Full Hot/Full Cold/DTC's Set|Page 17460
Page 1
background image

Control Module HVAC: All Technical Service Bulletins
Instruments - Ambient Temperature Display Inaccurate

Bulletin No.: 07-01-39-003

Date: April 18, 2007

TECHNICAL

Subject:
Inside Rearview Mirror Ambient Temperature Display Inaccurate Or Will Not Update Properly (Reprogram HVAC Control Module)

Models:
2007 Cadillac Escalade Models

with Automatic Dimming Rearview Mirror with Intellibeam(R), OnStar(R), Compass and Temperature Display (RPO DF5) and Intellibeam(R) High
Beam Control (RPO TQ5)

Condition

Some customers may comment on an inaccurate ambient temperature display on the inside rearview mirror. Others may comment that the ambient
temperature display does not update properly.

Correction

A revised calibration has been developed to address these conditions. Technicians are to reprogram the Heating, Ventilation and Air Conditioning
(HVAC) Control Module, using the Service Programming System (SPS), with the latest software available on TIS2WEB. Refer to the HVAC Control
Module Programming and Setup procedure in SI (Document ID# 1741202). As always, make sure your Tech 2(R) is updated with the latest software
version.

Warranty Information

For vehicles repaired under warranty, use the table.

Instruments - Ambient Temperature Display Inaccurate|Page 17465 > < A/C - Defaults To Full Hot/Full Cold/DTC's Set|Page 17460