Escalade ESV AWD V8-6.2L (2007)
11.
Select Next to view the "Select Programming Type" window.
12.
Select Normal from the Select Programming Type window.
13.
Select Next to view the "Service Programming System Calibration Selection" screen.
14.
Select Next to view the Summary screen.
15.
Verify that the current and selected calibration information is displayed on the Summary screen.
16.
Select Next to download the calibration to the Tech 2(R).
17.
Back at the vehicle, enter "Service Programming Systems".
18.
Select Program ECU and follow the on-screen instructions.
19.
When programming is complete, do the following:
19.1. Turn the Tech 2(R) OFF.
19.2. Turn the ignition switch OFF.
20.
Wait 30 seconds.
21.
Turn the ignition switch to ON with the engine OFF.
22.
Go into Diagnostics and check for DTC codes.
23.
Clear all codes.
Claim Information
For vehicles repaired under this product enhancement, use the table.
Disclaimer
