Escalade ESV AWD V8-6.2L (2007)
Tighten the bolts retaining the power steering cooler to 9 N.m (80 lb in).
2. Connect the power steering cooler hose (5) to the power steering pump (2) and reposition the clamp.
3. Connect the power steering outlet gear hose (3) to the power steering gear (1) and reposition the clamp.
4. Fill and bleed the power steering system. Refer to Power Steering System Bleeding.
5. Inspect all the hose connections for leaks.
6. Install the radiator grille reinforcement.
7. Install the radiator air baffle and deflector-upper.
8. Install the front grille.