Escalade ESV AWD V8-6.2L (2007)
1. Remove the caps from the fuel tank opening and the EVAP vent line.
2. Install the fuel fill hose to the fuel tank. Ensure that the notch in the hose is aligned with the notch on the fuel tank.
3. Tighten the fuel fill hose clamp (1).
Tighten the clamps to 2.5 N.m (22 lb in).
4. Install the fuel fill pipe bracket bolts (2, 3).
Tighten the bolt to 12 N.m (106 lb in).
5. Connect the fuel fill pipe vent line to the fuel tank quick connect fitting (5).
6. Position the fill pipe ground strap (5) to the left rear lamp ground wire (4).
7. Install the rear lamp ground wire (4) and ground strap (5) to the frame. Insert the lamp ground wire anti-rotation tab into the hole in the frame.
8. Install the chassis wiring harness ground bolt.
Tighten the bolt to 9 N.m (80 lb in).
