Escalade ESV AWD V8-6.2L (2007)
Ignition Coil: Service and Repair
IGNITION COIL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the intake manifold sight shield.
2. Disconnect the ignition coil wiring harness electrical connector (1) from the ignition coil.
3. Remove the spark plug wire from the ignition coil.
-
Twist the spark plug wire boot a 1/2 turn.
-
Pull only on the boot in order to remove the wire from the ignition coil.
4. Remove the ignition coil bolts.
5. Remove the ignition coil from the bracket. (left side shown, right side similar).
6. There are 2 different manufacturers for the ignition coils and coil brackets. They are as follows:
