Escalade ESV AWD V8-6.2L (2007)
5.
Using TIS Remote programming method, reprogram the BCM.
6.
After programming is complete for the BCM, turn off the ignition for 30 seconds.
7.
Use the Tech 2(R) to perform the BCM Module Setup.
^
Select "Diagnostics".
^
Select Model Year.
^
Select Vehicle Type.
^
Select Make.
^
Select Product Line.
^
Select Product Series.
^
F1: Body
^
Select HVAC System.
^
Select "Body Control Module".
^
F5: Module Set-up
^
F0: Set-up SDM Primary Key in BCM
Important:
The labor operation listed in this bulletin includes the necessary time to check and clear all DTCs.
8.
After the BCM is complete, check and clear all DTCs using the following Tech 2(R) path:
^
Select Diagnostic.
^
Select Model Year.
^
Select Vehicle Type.
^
Select Product Make.
^
Select Product Line.
^
Select Product Series.
^
F3: Vehicle Control Systems
^
Select Engine Type.
^
F0: Vehicle DTC Information
^
F0: DTC Display
^
Check and clear all DTCs from modules.
Warranty Information
