Escalade ESV AWD V8-6.2L (2007)
6.
Insert the hooked end of the spring into its slot on the sidewall. Use the 3rd hole up (clockwise) for the ashtray spring and 4th hole up (clockwise)
for the cupholder spring.
7.
Compress or crimp the seated hook around the sidewall.
8.
Repeat the above steps for the other door spring, if necessary.
9.
Reinstall the floor console bezel.
1.
Connect the electrical connection.
2.
Push down on the bezel at each corner to seat the retainer clips.
Warranty Information
Disclaimer
