cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Starter Motor|Service and Repair|Page 14732 > < Starter Motor|Service and Repair|Page 14730
Page 7
background image

9. Position the starter into place.

10. Install the starter bolts.

Tighten the bolts to 50 N.m (37 lb ft).

11. Install the right front wheel and tire.
12. Raise and support the vehicle.

13. Connect the engine wiring harness electrical connector (4) to the oil level sensor.

14. Install the transmission cover bolt.

Tighten the bolt to 9 N.m (80 lb in).

Starter Motor|Service and Repair|Page 14732 > < Starter Motor|Service and Repair|Page 14730