Escalade ESV AWD V8-6.2L (2007)
8. Remove the bolts retaining the steering gear to the frame.
9. Remove the steering gear from the vehicle.
10. Remove the pitman arm to the power steering gear retaining nut.
11. Remove the pitman arm from the power steering gear using J 6632-01 or J 29107-A.
Installation Procedure
1. Install the pitman arm to the power steering gear.
Notice: Refer to Fastener Notice.
2. Install the pitman arm to power steering gear retaining nut and washer.
Tighten the nut to 250 N.m (184 lb ft).
