Escalade ESV AWD V8-6.2L (2007)
Seals and Gaskets: Service and Repair
Transfer Case Input Shaft Seal Replacement
Transfer Case Input Shaft Seal Replacement
Tools Required
^
J 36825 Output Shaft Oil Seal Remover
^
J 23907 Slide Hammer with Bearing Adapter
^
J 42738 Front Output Shaft Seal Installer
Removal Procedure
1. Remove the transfer case.
Important: It may be necessary to use a sharp punch in order to poke a hole into the seal prior to inserting J 36825.
2. Using the J 23907 (1), and J 36825 (2), remove the input seal.
Installation Procedure
