Escalade EXT V8-6.0L VIN N (2004)
6. Install the manual lock lever to the trim panel.
1. Align the manual lock lever to the opening in the door trim panel.
2. Push inward until the manual lock lever is fully seated into the trim panel.
7. Install the door trim panel upper extension.
8. Install the door handle bezel.
Trim Panel Replacement - Side Front Door (With YE9 Later Production)
TRIM PANEL REPLACEMENT - SIDE FRONT DOOR (WITH YE9 LATE PRODUCTION)
REMOVAL PROCEDURE
1. Remove the door handle bezel.
2. Remove the door trim panel upper extension.
3. Using a suitable flat-bladed tool, gently pry the manual lock lever from the door trim panel.
4. Remove the push in fastener (3) at the front edge of the door trim.
5. Remove the cap (5) covering the screw on the rear edge of the trim panel.
6. Remove the trim panel screws.
-
Remove the screw (2) from within the opening where the manual door lock lever resides.
-
Remove the screw (4) from the opening in front of the armrest.
-
Remove the screw (6) from the rear edge of the trim panel.
7. Carefully slide the trim panel (1) up in order to release the retainers from the door.
8. Disconnect the electrical connectors.
INSTALLATION PROCEDURE
