Escalade EXT V8-6.0L VIN N (2004)
Ensure that the electrical connectors are routed through the openings.
2. Align the tab retainers with the holes in the door.
3. Install the trim panel to the door by lowering the trim panel into the tab retainer holes in order to seat the retainers.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the 2 trim panel screws.
Tighten the 2 trim panel screws to 2 N.m (18 lb in).
5. Install the manual lock lever to the trim panel by pressing the lever until the lever is completely seated.
6. Install the window-regulator handle, as necessary.
7. Install the door handle bezel.
Rear Side Door Trim Panel Replacement
TRIM PANEL REPLACEMENT - SIDE REAR DOOR
REMOVAL PROCEDURE
1. Remove the door handle bezel.
2. Remove the window-regulator handle, if equipped.
3. Remove the manual lock lever from the trim panel using a flat-bladed tool.
4. Remove the 2 trim panel screws.
5. Remove the trim panel from the door by carefully sliding the panel upward then outward.
6. Disconnect the electrical connectors.
INSTALLATION PROCEDURE
1. Connect the electrical connectors, if necessary.
2. Align the retainers with the holes in the door.
3. Install the trim panel to the door by lowering the trim panel down into the retainer holes in order to seat the retainers.
4. Install the trim panel screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the trim panel screws to 2 N.m (18 lb in).
5. Install the manual lock lever by pressing the lever until the lever is completely seated.
6. Install the window-regulator handle, if necessary.
7. Install the door handle bezel.
