Escalade EXT V8-6.0L VIN N (2004)
1. Install the heat/cool unit in the cup holder assembly from the front of the assembly.
2. Install the plastic cover.
3. Install the four retaining screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 7 Nm (62 lb in).
4. Install the blower assembly.
5. Install the console bezel assembly to the console.
Cupholder Replacement (Rear)
CUPHOLDER REPLACEMENT (REAR)
REMOVAL PROCEDURE
1. Lower the cupholder.