Replacing Engine Oil Cooler Hose/Pipe for Escalade EXT V8-60L VIN N (2004) Engine
12. If equipped with a 6.0L engine, perform the following:
12.1.
Remove the oil cooler hose bracket bolt (1)
12.2.
Remove the oil cooler hose adapter bolts (2).
12.3.
Remove the oil cooler hose assembly and gasket. Discard the gasket.
12.4.
Inspect the fittings, connectors and cooler hoses for damage or distortion.
13. If equipped with a 8.1L engine, perform the following:
13.1.
Remove the oil cooler hose bracket bolt.
13.2.
Disconnect the quick connect fittings (1) at the engine.
13.3.
Remove the oil cooler hose assembly. Discard the gasket.
13.4.
Inspect the fittings, connectors and cooler hoses for damage or distortion.
Installation Procedure