Escalade EXT V8-6.0L VIN N (2004)
Traction Control Switch: Service and Repair
With Stabilitrak
Traction Control Switch Replacement (Stabilitrak)
Removal Procedure
1. Remove the Instrument Panel (I/P) bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gauges and Warning
Indicators.
2. Gently lift the retaining tabs (2) and remove the stabilitrak switch (3) from the I/P assembly (1).
3. Disconnect the harness connector from the stabilitrak switch.
Installation Procedure
1. Connect the harness connector to the stabilitrak switch.