Escalade EXT V8-6.0L VIN N (2004)
^
After completion of programming, return to SPECIAL FUNCTIONS on the scan tool, select ALC Trimset and follow the instructions
displayed to perform the ALC trimset.
3. Install the cover (1) to the vehicle.
4. Install the retainers (1) to the control module cover (2).
5. Roll the seat downward in order to secure the seat in the original location.
Front Position Sensor Replacement
Front Position Sensor Replacement
Electronic Suspension (15 series)
Removal Procedure
1. Raise and support the vehicle.
2. Disconnect the sensor harness connector from the vehicle harness connector.
3. Remove the wheel speed sensor wire from the electronic suspension control (ESC) sensor bracket.
4. Remove the wheel speed sensor wire from the ESC sensor bracket.
5. Remove the ESC sensor link bracket bolt from the upper control arm.
