Escalade EXT AWD V8-6.2L (2009)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Oil Manifold Replacement
Valve Lifter Oil Manifold Replacement
Removal Procedure
1. Remove the intake manifold. Refer to Intake Manifold Replacement (RPOs LY2, LY6) (See: Intake Manifold/Service and Repair)Intake
Manifold Replacement (RPOs LC9, LMG, LY5, L76) (See: Intake Manifold/Service and Repair)Intake Manifold Replacement (Except RPOs
LY2, LY6, LC9, LMG, LY5, ) (See: Intake Manifold/Service and Repair).
2. Disconnect the engine harness electrical connector (1) from the oil pressure sensor.
3. DO NOT lift the valve lifter oil manifold by the electrical lead frame.
