Escalade EXT AWD V8-6.2L (2009)
4. If equipped with RPO LY6 (6.0L) engine, remove the oil cooler hoses from the clip.
5. Place a jack or utility stands at the rear of the vehicle.
6. If equipped, remove the engine protection shield. Refer to Engine Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and
Repair/Engine Shield Replacement).
7. If equipped, remove the front differential carrier shield. Refer to Shield Replacement (See: Transmission and Drivetrain/Differential
Assembly/Service and Repair/Removal and Replacement/Front Drive Axle/Shield Replacement).
8. For both 1500 and 2500 series, support the front differential carrier with a suitable adjustable jack.
9. For 1500 series vehicles, remove the differential carrier right side nuts.