Escalade EXT AWD V8-6.2L (2009)
plastic cap is damaged, obtain a new cap. Install the cap onto the cooler line prior cooler line installation.
*
Do not use the plastic cap in order to install the cooler line into the fitting.
14. If equipped with RPO L76 (6.0L) engine, perform the following:
1. Install the oil cooler hoses to the hose clip on the fan shroud.
2. Snap the oil cooler hose clip shut.
15. Install the oil cooler lines to the radiator. Refer to Engine Oil Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection (See:
Engine Oil Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection).
