Escalade EXT AWD V8-6.2L (2009)
10. Remove the EN 46330 .
11. Tighten the camshaft sprocket bolt
1. Tighten the bolt a first pass to 90 Nm(66 lb ft).
2. Tighten the bolt a final pass an additional 40 degrees using J 45059 .
10. Remove the EN 46330 .
11. Tighten the camshaft sprocket bolt
1. Tighten the bolt a first pass to 90 Nm(66 lb ft).
2. Tighten the bolt a final pass an additional 40 degrees using J 45059 .