cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Auxiliary HVAC Module Replacement (Extended Wheelbase)|Page 12419 > < Auxiliary HVAC Module Replacement (Extended Wheelbase)|Page 12417
Page 2
background image

10. Remove the fastener (5) for the upper auxiliary air duct (1). Carefully slide the duct up, into the headliner, until the bottom edge of the duct is

above the air distributor duct.

11. Remove the fasteners (3) retaining the auxiliary HVAC module to the vehicle.
12. Remove the auxiliary HVAC module (4) from the vehicle.

Installation Procedure

1. Install the auxiliary HVAC module assembly  (4) to the vehicle.
2. Install the 2 bolts (3) inside the vehicle in order to retain the auxiliary HVAC module to the vehicle.

3. Install the upper auxiliary air duct (1) to the air distributor duct. Install the fastener (5).
4. Connect the electrical connectors to the auxiliary HVAC module.
5. Install the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Standard Wheelbase)   (See: Body and

Frame/Interior Moulding / Trim/Trim Panel/Service and Repair)Rear Quarter Trim Panel Replacement - Right Side (Extended Wheelbase)   (See:

Auxiliary HVAC Module Replacement (Extended Wheelbase)|Page 12419 > < Auxiliary HVAC Module Replacement (Extended Wheelbase)|Page 12417