Escalade EXT AWD V8-6.2L (2009)
3. Connect the electrical connector to the inside air temperature sensor.
4. Secure the headliner to the roof hook and loop retainers.
5. Install the rear headliner retainers to the front headliner.
6. Install the left rear coat hook, if equipped. Refer to Coat Hook Replacement (See: Body and Frame/Interior Moulding / Trim/Service and Repair
).
7. Install the third pillar molding. Refer to Center Pillar Upper Garnish Molding Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair).
