Escalade EXT AWD V8-6.2L (2009)
The DIC displays the timer in the following format: XX: XX:XX:
The first XX represents hours elapsed, the second XX represents minutes elapsed, and the third XX represents seconds elapsed. The maximum range of
the timer is 99 hours, 59 minutes, and 59 seconds. After the maximum range is reached, the timer displays all zeros (00:00:00).
Park Assist Menu
The park assist menu is displayed in the DIC. The DIC displays the current state of the park assist until the IPC receives a message indicating otherwise.
The DIC displays (-- -) when communication with park assist is lost.
Total Fuel Saved (Hybrid)
Fuel Saved Over Lifetime shows how much fuel (by volume) was save by driving the Hybrid versus the non-Hybrid (if equipped). This value constantly
accumulates over the life of the vehicle and is not re-settable.
Fuel Saved Since Reset
The Fuel Saved Since Reset is similar to the Fuel Saved Over Lifetime but is re-settable by the driver.
English/Metric
The English/Metric mode is used to toggle between English and Metric units and can be accessed through the DIC Vehicle Info switch.
Trip Odometer
The trip odometer can be accessed through the DIC Trip/Fuel switch function. The trip odometer shows the current distance traveled in either miles or
kilometers since the last reset of the trip odometer. The trip odometer can be reset to zero by pressing the set/reset button while the trip odometer is
displayed.
The trip odometer has a feature called the retro-active reset. This can be used to set the trip odometer to the number of miles (kilometers) driven since the
ignition was last turned on. This can be used if the trip odometer is not reset at the beginning of the trip.
To use the retro-active reset feature, press and hold the set/reset button for at least four seconds. The trip odometer will display the number of miles (mi)
or kilometers (km) driven since the ignition was last turned on and the vehicle was moving. Once the vehicle begins moving, the trip odometer will
accumulate mileage.
Language
The DIC is capable of displaying in 8 languages
*
English
*
German
*
Italian
*
French
*
Spanish
*
Arabic
*
Chinese
*
Korean
Compass
The driver information center (DIC) displays the compass based on serial data message from the BCM. The compass module communicates with the
body control module (BCM) through a bi-directional data circuit. The instrument panel cluster (IPC) receives compass information from the BCM via
the serial data circuit. The compass is displayed in the DIC with other vehicle information and is at the bottom line of the DIC. The compass display
shows "- -" when a malfunction is present with the compass module or a compass serial data communication fault exists. The compass displays 'CAL' or
'C' when the compass needs to be calibrated. Cycle the ignition before performing the compass magnetic variation adjustment procedure.
Check that the compass module is properly installed in the vehicle since this may cause the compass to malfunction. The embossed arrow on the top of
the compass module should be parallel to the centerline of the vehicle.
Outside Air Temperature
The Outside Air Temperature is sent via the serial data circuit from the BCM to the IPC. It is displayed in the lower left corner of the DIC. It is displayed
in the English and Metric units
