Escalade EXT AWD V8-6.2L (2009)
5. Install the CMP sensor wire harness (737).
6. Connect the CMP sensor wire harness electrical connectors to the CMP sensor and the CMP actuator magnet.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
7. Install the 2 CMP sensor wire harness bolts (738).
Tighten the bolts to 12 Nm(106 lb in).
8. Finger tighten the top CMP sensor wire harness bolt. Using a box wrench through an opening in the harmonic balancer, tighten the bolt an
additional 1/4 turn (90 degrees).
9. Connect the engine wiring harness electrical connector (1) to the CMP sensor wire harness.
10. Lower the vehicle.
