Escalade EXT AWD V8-6.2L (2009)
Adhesives, Fluids, Lubricants, and Sealers ().
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the actuator (1 or 3) and tighten to 20 Nm(15 lb ft)..
3. Connect the electrical connector to the actuator.
4. Install the front differential carrier shield, if equipped. Refer to Shield Replacement (See: Transmission and Drivetrain/Differential
Assembly/Service and Repair/Removal and Replacement/Front Drive Axle/Shield Replacement).
5. Lower the vehicle.