Escalade EXT AWD V8-6.2L (2009)
Band Apply Servo: Service and Repair
2-4 Servo
4L60-E/4L65-E/4L70-E - Automatic Transmission
Special Tools
J 29714-A Servo Cover Depressor
Removal Procedure
1. Remove the catalytic converter pipe. Refer to Catalytic Converter Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Catalytic
Converter/Service and Repair/Catalytic Converter Replacement).
2. Remove the heat shield bolts.
3. Remove the heat shield.
4. Support the transmission.
5. Remove the transmission crossmember. Refer to Transmission Support Crossmember Replacement (4WD 2500 Series) (See: Body and
Frame/Frame/Cross-Member/Service and Repair/Transmission Support Crossmember Replacement (4WD 2500 Series))Transmission Support
Crossmember Replacement (4WD 1500 Series) (See: Body and Frame/Frame/Cross-Member/Service and Repair/Transmission Support
Crossmember Replacement (4WD 1500 Series))Transmission Support Crossmember Replacement (2WD 2500 Series) ()Transmission Support
Crossmember Replacement (2WD 1500 Series) ().
6. Lower the transmission with a suitable jack.
7. Remove the oil pan bolt below the servo.
8. Install the J 29714-A .
9. Tighten the bolt on J 29714-A in order to compress the servo cover.
