Escalade EXT AWD V8-6.2L (2009)
Caution: Do not use air powered tools in order to disassemble or assemble any vehicle component. Bolt torques are vital to diagnosis. You can
detect bolt torques only when using hand tools. Improper bolt torques can contribute to vehicle repair problems.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the right shock rear mounting bolt on the lower control arm.
Tighten the bolt to 50Nm (37 lb ft).
3. Install the right differential carrier mounting nuts and washers.
Tighten the mounting nuts to 100Nm (75 lb ft).
4. Install the cooling lines to the transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
(See: ).
