Escalade EXT AWD V8-6.2L (2009)
6. Inspect and remove the three clutch fluid seal rings (1). Install new pump rings, GM P/N 24238248. Refer to 1-2-3-4 and 3-5 Reverse Clutch Fluid
Seal Ring Installation (6L80/90) in SI for correct installation.
7. After completing the repair procedure, a Service Fast Learn Adapts procedure must be completed. Refer to Service Fast Learn Adapts in SI for
procedure details. After completing the Service Fast Learn Adapts procedure, the vehicle may still experience some minor driveability issues but
should learn improved shifting performance over the next several key cycles and driving time. Review with the customer the facts about the
transmission's ability to self-correct shifting issues or concerns. The transmission adapts are always functional and operate at transmission oil
temperatures about 40°C (104°F).
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer
Technical Service Bulletin # 09-07-30-004C
Date: 110113
A/T - Shift Flare/Harsh 2-3 Shifts/Harsh Park To Drive
TECHNICAL
Bulletin No.: 09-07-30-004C
Date: January 13, 2011
Subject: Flare and/or Harsh 2-3 Shifts, Delayed/Extended or Delayed with Harsh Feel Initial Park to Drive and/or Reverse to Drive Shifts (Install Three
Fluid Seal Rings)
Models:
2007-2009 Cadillac Escalade, Escalade ESV, Escalade EXT
2007-2009 Chevrolet Silverado
2008-2009 Chevrolet Suburban
2009 Chevrolet Avalanche, Tahoe
2007-2009 GMC Sierra, Sierra Denali, Yukon Denali, Yukon XL Denali
2008-2009 GMC Yukon XL
2009 GMC Yukon
Equipped with 6L80 (RPO MYC) or 6L90 (RPO MYD) Automatic Transmission
Vehicles Built Prior to December 2008
Attention:
Vehicles built prior to December 2008 are more likely to have leaking fluid seal rings. Starting in November 2008, a new 2-piece seal was implemented.
