Escalade RWD V8-6.2L (2007)
Fuel Injector: Testing and Inspection
Fuel Injector Balance Test with Tech 2
Fuel Injector Balance Test with Tech 2
1. With a scan tool, select the Fuel Injector Balance Test function within the Special Functions menu.
2. Select an injector to be tested.
3. Press Enter to prime the fuel system.
4. Record the fuel pressure indicated by the fuel pressure gage after the fuel pressure stabilizes. This is the first pressure reading.
5. IMPORTANT: The fuel pressure may rise after the fuel injector stops pulsing. Record the fuel pressure value immediately after the fuel injector
stops pulsing. DO NOT record the higher fuel pressure value.
Energize the fuel injector by depressing the Push to Start Test button on the fuel injector tester.
6. Record the fuel pressure indicated by the fuel pressure gage after the fuel injector has stopped pulsing. This is the second pressure reading.
7. Press Enter again to bring you back to the Select Injector screen.
8. Repeat steps 2-7 for each fuel injector.
9. Perform the Pressure Drop Calculation.
