Fleetwood V6-252 4.1L VIN 4 4-BBL (1982)
Power Steering Pump: Service and Repair
Power Steering Pump Replace
Fig. 13 Power steering pump installation. Exc. V8-250 (Typical)
V6-252
1.
Disconnect pressure and return lines from pump.
2.
Loosen adjusting screws on front and rear bracket, then remove drive belt.
3.
Remove adjusting screws securing front of mounting bracket, Fig. 13.
4.
Remove adjusting nut securing pump to rear mounting bracket.
5.
Remove pivot screw, then remove steering pump and bracket as an assembly.
6.
Reverse procedure to install.