Fleetwood V6-252 4.1L VIN 4 4-BBL (1982)
FIGURE 3 - OIL SCREENS
IMPORTANT
On 1979 models, the previous type oil screen must be replaced with a new oil
screen to avoid interference with the new oil pan (refer to Figure 3).
Note:*
The service update kit contains a pan, hex head screws with washers and a latex
coated cork gasket. The latex coated cellulose gasket must be ordered separately.
When reinstalling the oil pan, it is critical that a torque wrench be used to tighten the hex pan screws. Hand torque all 200/200C screws to 13 N-m (10
ft.lb.) and all 200-4R screws to N-m (8 ft.lb.).