Fleetwood V8-252 4.1L VIN 8 FI (1983)
FIGURE 3 - FUEL FEED AND RETURN LINES - TRANSMISSION MOUNTING LOCATIONS
7.
(C/D SERIES ONLY) Connect the fuel feed and return lines mounting bracket to the transmission, Figure 3, using a 15 mm flex socket
wrench with a long extension. (E/K SERIES ONLY) Connect the fuel feed and return lines mounting bracket, Figure 3, using 13 mm and 15
mm socket wrenches.
8.
(C/D SERIES ONLY) Lower vehicle.
9.
Connect the pipe to the exhaust manifold using a 13 mm box end wrench.
10.
Install the heat stove and attach it to the exhaust manifold using the six 10 mm hex screws.
11.
Connect the bracket which holds the A.I.R. pipe to the vacuum pipe at the exhaust manifold using a 7 mm box end wrench.
12.
Connect the bracket which holds the A.I.R. pipe to the vacuum pipe at the rear of the engine using a 7 mm box end wrench.
13.
Connect spark plug wires 2, 3, 4 and 8 to the distributor.
14.
Install air cleaner.
