cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

All Other Service Bulletins for Seat Belt: > < 99-09-40-006|Page 3636
Page 1
background image

Throttle Valve Cable/Linkage: All Technical Service Bulletins
A/T - Delayed/Harsh Upshifts, (Especially the 1-2)

Bulletin No. T 83-39 File In Group  7
Number

62

Date

Feb. '83

HARSH THM 200-4R TRANSMISSION UPSHIFTS - 1982 AND 1983 C-CARS

Some 1982 and 1983 C-cars, built prior to B.C. 113032, equipped with HT4100 engines and THM 200-4R transmissions may experience delayed and/or
harsher than normal transmission upshifts (especially the 1-2). This condition may be caused by a misrouted transmission TV cable that results in an
incorrect adjustment between the cable actuating lever on the throttle linkage and the TV link in the transmission.

FIGURE 1 - TV CABLE HOUSING INSPECTION

When diagnosing vehicles exhibiting this condition, inspect the TV cable housing at the locator clip for any indication of the housing having been moved
10-15 mm (3/4 to 1") from the original swaged mark caused by the clip (refer to Figure 1, View A). If the cable has been moved from its original
position, it will be necessary to reroute the cable to its correct position prior to adjustment of the TV cable. Replacement of the cable assembly (P/N
1623543) is necessary only if the cable binds or sticks because of being kinked in the locator clip area.

The cable should be routed around the oil pressure switch wiring harness, HEI distributor, AIR pipes, and the manifold vacuum pipes as shown in Figure
1.
For warranty purposes, to reroute the TV cable, use labor Operation Number T6064 at .4 hour. If the cable is replaced, use K6200 at .5 hour.

All Other Service Bulletins for Seat Belt: > < 99-09-40-006|Page 3636