Fleetwood V8-368 6.0L VIN 9 FI (1982)
7.
Remove steering column lower cover and the signal lever.
8.
On cars equipped with cruise control proceed as follows:
a. Disconnect cruise control wire from harness.
b. Remove harness protector from cruise control.
c. Wrap wire around turn signal lever until lever is disconnected. Do not remove wire from column.
9.
On all models remove bolts at upper support.
10.
Remove four screws securing upper mounting bracket to column and remove bracket.
11.
Disconnect turn signal harness and remove wires from plastic protector. Wrap a piece of tape around connector and harness to facilitate removal,
Fig. 7.
12.
Remove screw securing turn signal switch to column and pull switch out.
13.
Reverse procedure to install.
