cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Customer Interest for Band Apply Servo:|8473|Page 1834 > < All Other Service Bulletins for Accumulator:|90286A
Page 1
background image

Band Apply Servo: Customer Interest
A/T - Soft 1-2 and Harsh 2-3 Shifts

Bulletin No. T   

84-73

File In Group    

7

Number

103

Date

MAY '84

SUBJECT:

SOFT 1-2 AND HARSH 2-3 SHIFTS - THM 200C, 200-4R AND 325-4L

MODELS AFFECTED:

1979 SEVILLES 1980-1984 DEVILLES AND BROUGHAMS 1982-1984 ELDORADOS AND SEVILLES

1979 through 1984, Cadillacs equipped with a THM 200C, 200-4R or 325-4L transmission may exhibit soft 1-2 and harsh 2-3 upshifts. This condition
may be caused by a hydraulic leak in the seal areas of the intermediate servo outer piston. The affected Cadillac vehicles which may experience this
condition are as follows:

Year(s)

Vehicle(s)

Transmission/Model(s)

1979

Seville

THM 200C/AX

1980-1981

Deville and Brougham

THM 200C/AS

1981-1984

Deville and Brougham

THM 200-4R/AA, BY and OM

1982-1984

Eldorado and Seville

THM 325-4L/AJ, AL, AM and AE

FIGURE 1 - NEW RUBBER LIP SEALS

FIGURE 2 - PAST SCARF CUT TEFLON SEAL RINGS

Beginning in January, 1984, all models of THM 200C, 200-4R and 325-4L transmissions are being produced using a new intermediate servo outer piston
that has rubber lip seals in place of the past scarf cut Teflon ring seals (refer to illustrations). When servicing any of the above listed transmissions for a
soft 1-2 and harsh 2-3 upshifts condition, replace the scarf cut seals equipped intermediate servo outer piston with the appropriate new rubber lip seals
piston listed below:

Servo Piston Kit P/N's (Includes New Piston and Rubber Lip Seals)

Customer Interest for Band Apply Servo:|8473|Page 1834 > < All Other Service Bulletins for Accumulator:|90286A