Fleetwood V8-368 6.0L VIN 9 FI (1982)
Window Regulator: Customer Interest
Door Glass, Front - Disengaged From Front Run Channel
Bulletin No. T
83-40
File In Group
10
Number
45
Date
Feb. '83
FRONT DOOR GLASS - DISENGAGED FROM FRONT RUN CHANNEL 1980 TO 1983 SEDAN DEVILLES, BROUGHAM SEDANS AND
LIMOUSINES
Front door glasses that become disengaged from the front run channels on 1980 to 1983 Sedan DeVilles, Brougham Sedans and Limousines can be
corrected by using the following procedure:
1.
Remove front door trim panel and loosen water deflector as described in Section 5 of the Fisher Body Service Manual.
2.
Operate door glass to the full up position and adjust the belt stabilizer to glass to reduce inboard-outboard movement.
3.
Remove bolts retaining front run channel to inner panel (2 locations).
FIGURE 1 - REDRILLING NEW HOLE FOR FRONT DOOR GLASS
4.
Using a 9 mm (11/32") drill bit, drill a new hole 8 mm (5/16") rearward of the existing hole at each location (Figure 1).
5.
Reinstall front run channel to new location.
6.
Before installing trim panel, operate glass while inspecting for smooth operation.
For warranty purposes, use applicable Front Run Channel Operation Number and labor time plus 0.1 other labor hour for drilling. Use trouble code 92.
