Fleetwood Brougham V8-307 5.0L (1989)
Accumulator: Service and Repair
1.
Remove transmission pan attaching bolts, then the pan.
2.
Remove housing to valve body bolts.
3.
Remove housing and pin assembly.
4.
Remove 1-2 accumulator piston from housing pin and assembly. Apply low air pressure, 3 psi, to orifice housing.
5.
Remove the accumulator piston seal ring from the 1-2 accumulator piston.
6.
Remove the spacer plate and gaskets.
7.
Remove the 3-4 accumulator piston, spring and pin.
8.
Remove piston seal ring from piston.
9.
Reverse procedure to install.