Fleetwood Brougham V8-350 5.7L (1991)
Figure 3
3.
Pull back the weatherstrip from the weatherstrip retaining flange on the windshield posts. (The windshield posts should already have been filled
with foam per Bulletin T-90-78.) If there are any gaps at the weatherstrip retaining flange, apply 3M clear auto sealer, P/N 08551 or equivalent.
Refer to Figure 3. Reinstall the weatherstrips.
Figure 4
THE FOLLOWING STEP IS TO BE GIVEN SPECIAL SEALING ATTENTION!:
4.
The windshield post seam extends beyond the weatherstrip and wraps around the front body hinge pillar up under the GTX plastic fender. Refer to
